Total Pageviews

Showing posts with label FREE jewelry project. Show all posts
Showing posts with label FREE jewelry project. Show all posts

Monday, August 29, 2016

Make It Monday DIY: Whimsical Memory Wire Ring Featuring Charms Made With Swarovski® Crystals

On Saturday, I posted a tutorial of a super cute ear cuff with a peacock feather charm.  Today, I am showing you how to make a adorable beaded memory wire ring using more of charms made with Swarovski® Crystals from Cousin Corporation of America available exclusively from Michael's Craft Stores.  There are links below for my fellow ambassadors' projects using these lovely little charms as well.

This ring is fun and easy to make, and it will become your favorite go to ring in no time.




Materials:
Ring Sized Memory Wire
11/0 Seed Beads (Yeah....tiny ones)
1 Sunshine Bumble Bee Charm (or charm of choice)

Tools:
Memory Wire Cutters
Memory Wire Finishing Pliers (I HIGHLY recommend these over round nose for this project)

Skill Level: Beginner

Craft Time: About 45 minutes


Instructions:
Separate three to four rounds of memory wire and cut in line with the end of the wire.  Using the smallest part of the Memory Wire Finishing Pliers, form a loop at one of the ends of the memory wire.
 
Bead your wire in any pattern or solid color of your choice.  I used TOHO Galvanized Silver,  Starlight Galvanized Gold and Hematite for my Bee ring. Bead up until you have about a 1/4 of an inch of wire left and form your end loop the same as you did your beginning loop.






Attach your charm with the clip onto either one or both of the loops.  If you want a more adjustable ring, clip the charm on only one of the loops.


Enjoy your new fun ring!








LINKS:
DIY Wine Charms by Rebecca Grafton
DIY Gift Packaging by Rebecca Grafton
DIY Skull Necklace by Jennifer Priest
DIY Back To School Ideas by Jennifer Priest
DIY Ideas by Lisa Crone
DIY Handmade Card by Rachel Nielsen
DIY Bookmarks by Rachel Nielsen
DIY Dangle Ear Cuff by Shelly Owen



Friday, February 5, 2016

DIY: Crystal Bridal Necklace

Are you or someone you know getting married?  Do you love the look of expensive bridal jewelry?  Then this tutorial is for you!

Here is a super sparkly bridal necklace that looks expensive but is easy and cost-effective to make.  The gorgeous crystals are Crystazzi® brand from Cousin Corporation of America and are available now at A.C. Moore Craft Stores.  They have a brilliant fire to them that is just stunning.  Make it for your bride-to-be friends or make and keep for yourself just in case.  :)  Happy beading!


Materials:
1 pkg Crystazzi® Crystal AB Pear (36756227)
1 pkg Crystazzi® Crystal Rosaline AB Bicone (36756402)
1 pkg Crystazzi® Crystal AB Cushion/Saucer (36756466)
silver plated link chain
15 silver plated head pins
5 silver plated eye pins
4 silver plated 4mm jump rings
1 silver plated 6mm jump ring
1 silver plated lobster claw clasp

Tools:
Chain Nose/Flat Nose Pliers
Round Nose Pliers
Flush Cutters
Ruler

Skill Level: Intermediate Level Beginner

Craft Time: About an hour

Techniques to know:
Forming Loops
Cutting Chains
Jump Rings

Instructions:

1. Make the following: 1 large pear dangle, 4 small pear dangles, and 10 bicone dangles by threading a bead onto a head pin and forming a loop.

2. Make five cushion crystal connectors by threading a crystal onto an eye pin and forming a loop.

3. Measure and cut the following two lengths of chain: 18 inches and 4 inches.

4. Find the center link of both chains. To help you do this, thread an eye pin through the end links of each chain. Hold the chain up. Look for a link in the center part of the droop of the chain and slide a head pin through that link.  Set shorter chain aside.

5. Attach one of the cushion connectors to the center link of the long chain.  Attach a bicone dangle to the 4th link from the center link. Attach another cushion connector in the fourth link over from the bicone. Attach one more bicone and one more cushion in the same manner.  Repeat for the opposite side of the center link.

6. Using a 4mm jump ring, attach the center link of the short chain to the center cushion connector.  Attach another 4mm jump ring to the 10th link over from the center of the short chain to the bottom of the next cushion connector. Attach the end link of the short chain to the next cushion connector. Repeat for opposite side.

7. Attach the large pear dangle to the center link of the short chain. Attach a bicone connector five links over from the center link of the short chain. Attach a small pear dangle to the same link of the small chain as the second cushion connector. Five links over, attach another bicone dangle. Attach a small pear dangle to the last link of the short chain. Repeat for the opposite side.

8. Using the 4mm and 6mm jump rings, attach the clasp to end of the long chain.



 9. Wear your shiny new bridal beauty.




Thursday, August 27, 2015

DIY Gemstone Wave Copper Cuff Bracelet

I created this tutorial for Prima Bead last month and am just now getting around to posting the step-by-step tutorial for it.  The written instructions are also on Prima Bead in a downloadable PDF format.


Gemstone Wave Copper Cuff Bracelet

Materials List:
16 gauge copper wire
24 gauge copper wire
Two packs 10mm Round Gemstones or similar
 
Tool List:
Round Nose Pliers
Chain or Flat Nose
Heavy Gauge Wire Cutters
Flush Cutters
Ruler
Tape Measure

Optional Tool List:
Nylon Jaw Pliers
Sharpie
Bracelet Mandrel 
 
Skill Set: Intermediate
Wire Wrapping
Working with Jigs

Craft Time: 1 hour

Instructions:
Cut and straighten 40 inches of 16 gauge wire. Set aside.

Measure wrist. Place tape measure around jig and place a peg at each end of your wrist measurement in the center of the rows. Skip over one row and begin placing pegs into the top row of the jig skipping every other hole until you reach your end peg. Place pegs in the next to last row of the jig skipping every other hole until you reach your end peg. Pegs should be diagonal from the top row, not in line with it.

Make a loop with round nose pliers in one end of the wire. Place the loop over your anchor peg. Wrap the wire over each peg forming a wave. Do not wrap around your stop peg. Slip wire gently off jig.


Bend the anchor loop sideways so that it is perpendicular to the wire.

Measure one inch from the last wave and make a 90ยบ bend towards the waves. Fold the wire down back so that the wire end now runs parallel to the waves. Measure about ½ inch from the bend and trim off extra wire. Press the bend close together so it will easily slide through the anchor loop forming a clasp.

 
 












 Adjust any odd-shaped bends in the wave with round nose and flat nose pliers.  If needed, adjust the openings of the waves with the barrel of a Sharpie®™Marker.

Working with short pieces of 24 gauge wire, attach gemstones to each bend of the wave except the bends closest to the clasp. 

Squeeze the waves closer together and reshape into a bracelet.








Tuesday, July 7, 2015

Florida Keepsake Necklace

Of all the souvenirs I receive and pick up in Florida, I think by far my favorite are the little jars of sand and shells.  Why do I like them?  They have so much project potential.

In this tutorial, I will show you how to make a cute, Swarovski crusted, keepsake necklace like the one below. You can customize the project to use any color you choose.  I chose a seaglass theme.


Supplies I Used:
One "Florida" mini-bottle sand and shell keychain souvenir with keychain removed
One 21x10.5 mm Swarovski crystal pendant (6010) in Golden Shadow (SC5152)
SC5152
SC5152
SC5152
Two 7.2mm Swarovski crystal non-hotfix flatbacks (2028) in Mint Alabasater (hard to find)
One 7.2 mm Swarovski crystal non-hotfix flatbacks (2028) in Sand Opal
Four 6mm Swarovski crystal bicones in Sea Glass (47501514)
Four 4mm Swarovski crystal bicones in Sea Glass (47500514)
Two 6mm  heavy gauge jump ring
One 4mm heavy gauge jump ring
Three regular jump rings
Eight silver plated headpins
Swarovski crystal non-hotfix flatback mix in Turquoise and Brown combo (47509569)
Swarovski crystal non-hotfix flatback mix in Crystal (47509526)
Swarovski crystal 4.7mm 2088 Xilion Rose flatbacks in Light Colorado Topaz
36" beige organza ribbon (63800353)
36" large link silver plated copper chain (AJM-ZG-003-00031 available from Walmart)
12" 18 gauge silver plated copper wire
 E-6000 Glue
Singer brand Sew-No-More (available from Walmart)
Singer brand Fray-No-More (available from Walmart)






Tools Used:
Large Bail Making Pliers
Flush Cutters
Chain Nose Pliers (2 pair)
Round Nose Pliers
Large Yarn Needle
Toothpicks

Techniques Required:
Wire Wrapping
Form a Loop
Jump Rings 
Cutting Chain

Skill Level: Intermediate

Craft Time:  About an hour

Instructions:
Put a heavy gauge jump ring through the hole of the Swarovski pendant. Connect the 4mm heavy gauge jump ring to the first jump ring and set aside.  Create 8 Swarovski crystal bicone dangles using headpins and form a loop. Set aside.










Cut 36 inches of large link chain and set aside. Cut 36 inches of organza ribbon and set aside.

Remove cork from mini-bottle. Using a toothpick smear E-6000 to the inside of the keepsake bottle necklace and replace cork.




Form a Loop at the end of the wire. Press the wire against the neck of the bottle and wrap around the neck about three times.

Take the tail of the wire just past the loop and curl backward and thread the tail back through the loop.







Create a spiral with your fingers. Adjust the wraps with round nose pliers to make sure the spiral is smooth










Wrap around the top of the cork two times and pull around and across the top of the cork.  Using the largest barrel of bail making pliers form a triple wrap and trim the wire flush against the cork.


Using a tooth pick, smear glue into the opening in the wraps of wire at the top of the bottle to secure the wire and allow to dry.











Using a toothpick, smear E-6000 onto the bottom of the bottle and one side of the bottle and begin placing on the flatbacks varying the sizes and colors.

















Pick a pattern that is pleasing to you and have fun! Allow to dry.





Open the link of the chain as you would a jump ring - from side to side.

Hook it to the bail of the bottle, and slide into the last link of the other end of the chain.  Close the link.







Open a 6mm jump ring and slide on a 6mm, 4mm bicone, and close the ring. Open another jump ring, thread through the first jump ring and slide one a 6mm and a 4mm bicone.  Repeat until you get to the last jump ring. 


Use a heavy gauge jump ring and thread through the last regular jump ring and slide on the last 6mm bicone dangle, 4mm bicone dangle and the 4mm jump ring of the Swarovski pendant. Attach to the bail of the bottle.

Thread the ribbon onto the large yarn needle. Beginning at the back of the chain, skip the center link and thread through the next skipping every other link.  Make sure to leave a eight inch tail of ribbon.

Do not pull tight or the ribbon could snag on the lengths of the chain.  Pass the needle in the opposite direction of the the tail of the ribbon. 


Smooth out the chain to make sure it isn't bunched up and the ribbon isn't pulled too tight.

Tie a loose overhand knot and then a bow.  Trim the ribbon ends. Treat ends with Fray-No-More and apply a dab of Sew-No-More to the center of the bow.


If you find the "Florida" fading or chipping off, repair with a Sharpie and seal with clear fingernail polish.