Total Pageviews

Showing posts with label free jewelry tutorial. Show all posts
Showing posts with label free jewelry tutorial. Show all posts

Friday, February 5, 2016

DIY: Crystal Bridal Necklace

Are you or someone you know getting married?  Do you love the look of expensive bridal jewelry?  Then this tutorial is for you!

Here is a super sparkly bridal necklace that looks expensive but is easy and cost-effective to make.  The gorgeous crystals are Crystazzi® brand from Cousin Corporation of America and are available now at A.C. Moore Craft Stores.  They have a brilliant fire to them that is just stunning.  Make it for your bride-to-be friends or make and keep for yourself just in case.  :)  Happy beading!


Materials:
1 pkg Crystazzi® Crystal AB Pear (36756227)
1 pkg Crystazzi® Crystal Rosaline AB Bicone (36756402)
1 pkg Crystazzi® Crystal AB Cushion/Saucer (36756466)
silver plated link chain
15 silver plated head pins
5 silver plated eye pins
4 silver plated 4mm jump rings
1 silver plated 6mm jump ring
1 silver plated lobster claw clasp

Tools:
Chain Nose/Flat Nose Pliers
Round Nose Pliers
Flush Cutters
Ruler

Skill Level: Intermediate Level Beginner

Craft Time: About an hour

Techniques to know:
Forming Loops
Cutting Chains
Jump Rings

Instructions:

1. Make the following: 1 large pear dangle, 4 small pear dangles, and 10 bicone dangles by threading a bead onto a head pin and forming a loop.

2. Make five cushion crystal connectors by threading a crystal onto an eye pin and forming a loop.

3. Measure and cut the following two lengths of chain: 18 inches and 4 inches.

4. Find the center link of both chains. To help you do this, thread an eye pin through the end links of each chain. Hold the chain up. Look for a link in the center part of the droop of the chain and slide a head pin through that link.  Set shorter chain aside.

5. Attach one of the cushion connectors to the center link of the long chain.  Attach a bicone dangle to the 4th link from the center link. Attach another cushion connector in the fourth link over from the bicone. Attach one more bicone and one more cushion in the same manner.  Repeat for the opposite side of the center link.

6. Using a 4mm jump ring, attach the center link of the short chain to the center cushion connector.  Attach another 4mm jump ring to the 10th link over from the center of the short chain to the bottom of the next cushion connector. Attach the end link of the short chain to the next cushion connector. Repeat for opposite side.

7. Attach the large pear dangle to the center link of the short chain. Attach a bicone connector five links over from the center link of the short chain. Attach a small pear dangle to the same link of the small chain as the second cushion connector. Five links over, attach another bicone dangle. Attach a small pear dangle to the last link of the short chain. Repeat for the opposite side.

8. Using the 4mm and 6mm jump rings, attach the clasp to end of the long chain.



 9. Wear your shiny new bridal beauty.




Tuesday, August 11, 2015

DIY Filigree Hoop Earring Tutorial

Last week I gave a review of a two wire jigs Prima Bead has available on their site and I told you I would be posting tutorials using both jigs.  Here is the very first of those tutorials.  This particular one is using the flat or regular jig.  It is a very versatile tutorial that can be easily customized to your tastes.  Your end result will be a lightweight and fashionable pair of earrings.

SPECIAL NOTE: DO NOT USE HALF-HARD WIRE.  Your pegs will snap.

Filigree Hoop Earrings


Materials Needed:
20 gauge silver plated copper wire or any wire you choose (I used 63815072 from Prima Bead)

Tools Required:
Wire Jig (34737052)
Round Nose Pliers
Flat Nose or Chain Nose Pliers
Marker
Emery Board or Wire Rounder

Skill Level: Beginner 

Craft Time: 20 - 30 minutes

Skills Required:
Wire Jig

Instructions:
Measure, cut, and straighten two 10 inch pieces of wire.  Form a loop at one end of each piece of wire. Set aside.


Place 16 pegs into the jig in two rows of 8 diagonally across the jig. 



Place one piece of wire between the rows of pegs.  Slide the loop all the way against the pegs.  












 Begin wrapping the wire around each peg forming a series of figure 8s.









Gently slide form off the jig.


 




Press the loops closed using flat or chain nose pliers.  Adjust any odd shaped loops with round nose pliers.












Bend the end of the wire at a 90ยบ angle flush with the last loop using flat or chain nose pliers.








Wrap form around the barrel of a marker.  Slip the tail into the end loop.



 Make a slight bend in the very end of the wire using flat or chain nose pliers. Trim if necessary.



Smooth wire end with emery board or wire rounder.



 Repeat for second wire.



Design Idea:  Wire wrap crystals or beads into the loops of the filigree for a little bling.