Total Pageviews

Friday, July 19, 2013

FREE Friday Afternoon Project - Southwestern Style Bracelet

Ah, another hot Mississippi Friday afternoon......what could be better than a FREE DIY Jewelry Project?!

This lovely Southwestern style bracelet is easy and fast.


This easy beginner piece was created using the Jewelry Class in A Box in Casual available from Prima Bead.


Project time is about 20 minutes and the skill level is great for a beginner jewelry maker.

Materials from Kit:
1 - silver metal connector
1 - copper metal connector
1 - large turquoise acrylic bead
2 - teal wooden heishi style beads
1 - bronze glass bead
1 - 2mm wooden bead
1 - oval wooden bead
2 - eye pins
3 - 4mm jump rings
1 - 6mm jump ring
1- Chain
1 - Clasp
1 - Bead Mat

Tools Needed:
Flush Cutters
Round Nose Pliers
Chain Nose Pliers

Skills Needed:
Cutting chain
Forming Loops
Jump Rings

Measure your wrist first so you can make sure you are creating a bracelet that will be comfortable for you to wear.  This bracelet measures 7.5 inches, so all measurements are based on that.  Make sure you adjust accordingly for smaller or larger wrists.

Attach the small copper metal connector to the larger silver metal connector with a jump ring.

Slide the 2mm wooden bead, the bronze glass bead, two teal wooden heishi style beads and the oval wooden bead onto an eye pin. Form a loop.

Attach to the copper connector. Attach a 6mm jump ring using a 4mm jump ring to the loop at the end of the bead connector.

Slide a large turquoise colored acrylic bead onto an eye pin and form a loop.  Attach to the silver metal connector on the opposite side of the copper metal connector.


Cut two 3 inch sections of chain.  Attach both pieces to the turquoise bead using a 4mm jump ring.  Attach a clasp using a 4mm jump ring to the opposite end of the chain. I have found that attaching the clasp closer to the focal area of a bracelet instead of at a center point makes it easier to get the bracelet opened and closed.

Enjoy your bracelet.







Five More Jewelry Makers Join the Successful Brand Ambassador Program

Five More Jewelry Makers Join the Successful Brand Ambassador Program 
ccc
LARGO, Fl., July 19, 2013 - Cousin Corporation of America, a premier manufacturer of jewelry making components, has chosen five talented jewelry makers to be brand ambassadors, joining the inaugural ambassadors for the 2013-14 year. Cousin again received an overwhelming amount of applications for the coveted five slots. The ambassadors were chosen based on their unique contributions to the program, commitment to jewelry making and social media and networking influence.

The 2013-2014 Creative Circle ambassadors are: Allison Cooling, Dawn Doucette, Vicki O'Dell, Lisa Stukel and Rebecca Utermohlen. As Cousin Ambassadors they will have a platform to share ideas with the product development team, create projects for publications in magazines and on various social media platforms, preview upcoming programs and provide feedback about products before they go to market.

"Our Creative Circle program has absolutely surpassed our expectations," said Jeff Cousin, President. "We want to keep the craft of jewelry making relevant and maintain it as a growing art. We are excited to expand the program so we can show even more people that jewelry making is accessible and rewarding, and also introduce them to the Cousin brand."
The ambassadors were officially welcomed by the Creative Circle team on July 18th and will be highlighted on Cousin's website www.cousin.com and their Facebook page https://www.facebook.com/CousinCorp.

About Cousin
Cousin Corporation of America is a family-owned company founded in 1970 as Enterprise Art, a retail craft store in Largo, Florida. Today Cousin is a premier wholesaler of jewelry making supplies. Their focus is to design, manufacture and provide quality jewelry making products at an exceptional value to customers who are inspired by the craft of jewelry making. For more information about Cousin Corporation of America, please visit www.cousin.com.

Friday, July 12, 2013

FREE Friday Afternoon Project - Razzle Dazzle Earrings

Relaxing on a Friday afternoon......How about a DIY earring project?!  FREE!


Super easy and very elegant, these Razzle Dazzle Earrings were created with the Jewelry Class in a Box in Shimmer available from Prima Bead.



It's a very easy project for the beginner.  The earrings take about 15 to 20 minutes to complete, and you don't need any special tools.  The tool in the kit will work just fine for this project.

Materials from Kit:
22 bugle beads
4 bicones
6 large rondelle beads
8 headpins
2 ear wires
2 jump rings

Tools:
3-In-One from Kit

Skills Needed:
Jump Rings
Forming Loops

Begin by making all the dangles first.  Slide the beads onto head pins and form a loop. You will need two bicone dangles (see photo on left), four glass rondelle and bugle bead dangles (see photo on right), and two rondelle/bugle/bicone dangles (see photo below)



Open a jump ring and slide on one of the short rondelle dangles, one of the long rondelle dangles, one more short rondelle dangle and an ear wire.  Close jump ring. (See photo below.)




 
Next, attach the bicone dangle to the loop at the bottom of the ear wire. (See photo on right.)

Enjoy your earrings.






Friday, July 5, 2013

Friday Afternoon Project - Boho Chic Bracelet

Nothing better than a Friday afternoon, especially one right after a holiday.....except a Friday afternoon after a holiday that includes a FREE project!


Today's project is a Boho Chic leather and bead bracelet.  This was created using a Jewelry Class in a Box in Natural from Prima Bead.  



After flipping through the project pamphlet included in the kit, I decided to combine a couple to make a really cute bracelet.  Project time is about 20 minutes.  Skill level is beginner to intermediate.

Supplies from the kit:
1 - Round Twisted Rope Style Connector
1 - Cord End
1 - Lobster Claw Clasp
2 - 4mm Jump Rings
1 - 6mm Jump Ring
2 - crimp tubes
1 - Wooden Teal Bead
2 - Brown Speckled Red Acrylic Beads
1 - Brown Speckled Tan Acrylic Bead
2 - Antique Brass Colored Acrylic Spacer Beads
6 - Wooden Brown Daisy Spacer Beads
Tan leather
Flexible beading wire
Bead Mat

Tools Needed:
Crimping Pliers
Flush Cutters
Chain Nose Pliers
Measuring Tape
Scissors

Skills Needed:
Simple Knotting
Crimping


The leather will make up the majority of the bracelet.  Measure your wrist to determine length.  My wrist measures roughly 7 inches.  I went with an 8 inch bracelet for comfort.  
 
I cut off 9 inches of the leather and made a Lark's Head Knot (see photo on right) on to the connector.  The leather portion should make up the majority of the bracelet.

 
Attach a cord end to the ends of the leather using Chain Nose Pliers.  (See photo below left.) Attach a 4mm jump ring and a clasp to this end.



Attach a 4mm jump ring to a 6 mm jump ring.  Thread beading wire through the 4mm jump ring and center the ring in the middle of the piece of wire.  Slide on a crimp tube onto both ends of the wire and crimp. (See photo on right,)

 

Slide on one red bead, a brass spacer, five daisy spacers, a brass spacer, a teal bead, a tan bead, another red bead, and one more daisy and a crimp tube.  Run the ends of the wire through the metal connector end of the leather strand and back through the crimp tube.  Pass the wire back through the last daisy spacer and the red bead.  (See photo on right.) Crimp and trim off the extra wire.  Enjoy your new bracelet.





 You can mix and match the beads to suit your particular tastes as well. Have fun and enjoy your crafting afternoon.

Class In A Box REVAMP!

Last year, I had the opportunity as a Creative Circle Ambassador along with my fellow ambassadors to give feedback on Cousin Corporation's Jewelry Class in A Box kits that are marketed through its sister company, Prima Bead. These boxed kits contain a very lovely and large selection of beads, findings, a 3-In-One Tool that is color coordinated to the beads, a bead mat, and instruction booklet.  I have to say that most 3-in-One tools are a waste of money, but this one actually works great.  To be a small tool, it really holds up.  Great job, Cousin folks on that for sure!

We gave our feedback and Cousin listened.  They have revamped the line and just just introduced four new Jewelry Class In A Box kits.  The packaging became smaller and more durable.  The glued shut clam shell holders for the beads are gone and replaced with individual bags. No more cutting your fingers on the packaging or flying beads after the clam shell pops.  The beads are displayed in the box in a way that draws your interest very quickly to the product.  I love the added touch of the ribbon around the bead mat.  The packaging just has a more sleek and trendy look to them.

Each kit is designed to suit your individual tastes and styles.  There is a Casual, Classic, Shimmer, and Natural. The color coordinated beads and findings make for tons of jewelry making fun.


There are going to be some really nice step-by-step projects using each of these kits to follow.

Monday, June 17, 2013

Bead Swap with my Fellow Michaels Instructors

At the end of May a group of Michaels Craft Store jewelry instructors decided to do a bead swap.  We paired off and gathered up supplies to ship off to our swap partners.  The rules were simple:  1. raid your bead stash for a focal bead or pendant, coordinating accent beads and a clasp. 2. Ship in a timely manner the collection to your partner.  3. Only pick and send out things that you would love to receive and work with.

Actual reveal day is set of June 28th.  But since I was done, I decided to post it and walk you through my design process for this project.

Let's start with the amazing items I received.
I received some wooden beads, gorgeous pearls, a handmade Bird's Nest, white Turquoise, copper chain, Rose Gold plated copper ear wires and ball head pins, a beautiful copper clasp, a large enameled copper filigree flower, and some lovely little wire spirals (not pictured), plus a assortment of just goodies not necessarily part of the project (also not pictured).

I started by forming the filigree piece into a slight bowl using a wooden dapping block.  I wire wrapped the Bird's Nest to the filigree.  And that's when I drew a blank.  It has taken me nearly a month to come up with a design that I actually liked (mainly because I was being lazy).

Since I had the natural beads, I decided to throw in some leather, but I didn't know what I was going to do with it or how to incorporate it.  Then I thought that the pearls would look rather cool on the leather cording.  I reamed out seven of the larger pearls with my flex shaft (Dremel) so they would slide easily onto 2mm round leather lacing.  I don't recommend this if you can purchase some pearls with larger holes.  I have burns on my fingers from the pearls overheating during the drilling process.

I cut two long strands of the cording and did a hitch knot to attach the leather to one of the holes in the filigree.  On each strand I began to tie single overhand knots and slide on the pearls.  After each pearl, I tied an additional knot.  I did this in no particular pattern.  I tied all the leather strands together at the end and slide on one of the wire spirals.  I pinched the ends of the spiral to keep it in place on the leather and glued the knot using BeadFix jewelry adhesive.  I attached a gold plated cord end from my own supplies, trimmed the excess leather and added some more glue.

For the other side, I attached the copper link chain from my swap supplies with a handmade copper jump ring..  I attached flexible beading wire to another copper jump ring and then hooked that ring onto the chain.  I threaded a few wooden beads, white pearls and a few of my personal stash of colored pearls that looked like patinated copper.  I laced the strand of beads through the chain and crimped the end off and attached it to a jump ring at the end of the chain.

Now what?  I took another piece of flexible beading wire and strung on one of the white turquoise beads, wood beads and more of the colored copper pearls.  I attached that to the lovely copper toggle clasp.  On the other side, I took more of the leather cording and did a four strand braid attaching it with more of the gold plated cord ends.  It was a bit plain so I took some flexible beading wire and ran it through the braids adding in a two pearls and one of the wire spirals.  This end was attached to the second half of the toggle.

Something still was missing.  I added three dangles to the bottom of the filigree.  Two of which were white turquoise and the middle one was two wood beads and two white pearls.  I attached these with handmade jump rings.   And yet, something was missing.  I had one left over turquoise bead, and I wanted to use it some how.  I was going to make a chain out of copper washers, but didn't have any jump rings that size, and I really didn't want to make any more.  I looked at the jump rings I had on hand and decided to create a bit of chainmaille pieces and attach them to either side of the turquoise.  The piece wasn't quite as long as I would have liked, so I made to pearl connectors.  I attached this piece with jump rings on either side of the necklace.  Worked like a charm.  I love how it turned out.



This was a very fun and challenging experience.  I know I will participate again.  I can't wait to see everyone's pieces. Each of Michaels' instructor was so creative.


Saturday, June 15, 2013

Is It Too Soon to Think About Christmas? Nah!

We are half way to Christmas already.  The holiday season is about to smack us square in the face. There is some wonderful crafting new to share about Christmas. Cousin is about to roll out a new line to stores in just a few days called 'Tis The Season.  It is filled with lovely Christmas themed charms, glittery beads, tiny jingle bells, and tons of ideas.  There are rings specifically made for wine glass charms too with this line.  It's enough to get your creative juices flowing and be ahead of the game when Christmas parties comes around.

The Creative Circle Ambassadors were the first to receive the line so we could play around with it. Delving into this lot really got me in the Christmas spirit.  And yes, I got a bit carried away. Below you will find a video tutorial for some really simple and cute ornaments using this line as well as a few pictures of the items I made.